technik:colo-zettachring

Unterschiede

Hier werden die Unterschiede zwischen zwei Versionen angezeigt.

Link zu dieser Vergleichsansicht

Beide Seiten der vorigen Revision Vorhergehende Überarbeitung
Nächste Überarbeitung
Vorhergehende Überarbeitung
technik:colo-zettachring [17.05.2022 - 20:13] – 2a01:01e8:c003:1::/64 Roland Volkmanntechnik:colo-zettachring [25.03.2025 - 20:51] (aktuell) nrb
Zeile 1: Zeile 1:
 ====== Colocation Zettachring ====== ====== Colocation Zettachring ======
  
-Der FFS e.V. mietet in der Nepustil Colocation im Zettachring 10a, Stuttgart, HE fuer ein Gateway.+Der FFS e.V. mietet in der Nepustil Colocation im Zettachring 10a, Stuttgart, HE fuer zwei Server und eine Management-Box.
  
 ===== Hardware ===== ===== Hardware =====
  
-  * ALIX-Box ffs07 mit CF-Karte im 19 Zoll (1 HE) +  * APU2C ffs14 mit 16GB SSD, Huawei ME909s-120 LTE-Modem, 1nce SIM 
-  * Server ffs08 1 HE AMD Epyc, 16 Core, 32 GiB RAM, 2x 250 GiB SSD, Intel X710-DA2+  * Server ffs08 1 HE AMD Epyc, 16 Core, 256 GiB RAM, 2x 4 TiB NVMe, Intel X710-DA2, 140-150W (Vollast beim Firmware-Build 220 Watt) 
 +  * Server ffs13 1 HE AMD Epyc 8324P, 32 Core, 256 GiB RAM, 2x 8 TiB NVMe, Intel X710-DA2 
 + 
 +===== IPMI Knowhow ===== 
 + 
 +Per SSH auf die serielle Konsole zu kommen 
 + 
 +<code> 
 +$ ssh -J ffs14 10.0.7.13 -l ADMIN 
 +-> start /system1/sol1 
 +/system1/sol1 
 +press <Enter>, <Esc>, and then <T> to terminate session 
 +(press the keys in sequence, one after the other) 
 +</code> 
 + 
 +Zum Beenden hintereinanter enter, esc und T (Shift+t) druecken 
 + 
 +Serielle konsole scheint auf ffs13 nicht konfiguriert zu sein TODO FIXME 
 + 
 +===== LTE-Modem ffs14 ===== 
 + 
 +Das LTE-Modem in ffs14 haengt sich manchmal nach laengerer Zeit auf. Daher gibt es seit 20240624 einen Cronjob in ''/etc/cron.daily/reset-modem'' der taeglich das Modem resettet. 
  
 ===== Netz ===== ===== Netz =====
  
-  * 1x Kupfer 1 Gbit fuer ALIX +  * 1x Kupfer Uplink 1 Gbit fuer APU 
-  * 1x Glas 1310nm, 10 km, 10 Gbit fuer Server+  * 1x Glas 1310nm, LR, 10 Gbit Uplink ffs08 auf Switch Nepustil 
 +  * 1x Glas 1310nm, LR, 10 Gbit Uplink ffs13 auf Switch Nepustil 
 +  * 1x Glas 1310nm, LR, 10 Gbit Port Stuttgart-IX auf ffs13, LAG, LACP, short timeout
  
-Die aktuelle Annahme ist, dass auf beiden Kabeln folgende VLANs rausfallen:+Auf allen Uplinks fallen folgende VLANs raus:
 ^ VLAN     ^ Netz                ^ ^ VLAN     ^ Netz                ^
 +| 229      | ''85.236.200.128/29'' |
 +| :::      | ''2a01:1e8:3:5::10/124''' |
 | 284      | ''85.236.195.64/29'' | | 284      | ''85.236.195.64/29'' |
 | :::      | ''2a01:1e8:c003::/112'' | | :::      | ''2a01:1e8:c003::/112'' |
 | 285      | ''85.236.195.72/29'' | | 285      | ''85.236.195.72/29'' |
 | :::      | ''2a01:1e8:c003:1::/64'' | | :::      | ''2a01:1e8:c003:1::/64'' |
 +| 377      | PNI inter.link |
 +| 2000     | Community-IX Peering LAN |
  
 ''2a01:1e8:c003::/48'' hat eine statische Route auf '''2a01:1e8:c003:1::93'''. ''2a01:1e8:c003::/48'' hat eine statische Route auf '''2a01:1e8:c003:1::93'''.
  
 ^ Gerät ^ Karte      ^ Port ^ Ziel     ^ MAC ^ ^ Gerät ^ Karte      ^ Port ^ Ziel     ^ MAC ^
-ffs07 | intern     | 1    | enp0s11Gast-NAT ffs08 ''00:0d:b9:2d:0a:98'' |+ffs14 | intern     | 1    | ifnameUplink nepustil | **bitte ergaenzen** | 
 +| :::   | :::        | 2    | ifname, IPMI ffs08, ''10.0.
 | :::   | :::        | 2    | enp0s10, IPMI ffs08 | ''00:0d:b9:2d:0a:99'' | | :::   | :::        | 2    | enp0s10, IPMI ffs08 | ''00:0d:b9:2d:0a:99'' |
 | :::   | :::        | 3    | enp0s9, Uplink nepustil | ''00:0d:b9:2d:0a:9a'' | | :::   | :::        | 3    | enp0s9, Uplink nepustil | ''00:0d:b9:2d:0a:9a'' |
Zeile 39: Zeile 68:
   * ''85.236.195.72/29'': Ausleitung Clients   * ''85.236.195.72/29'': Ausleitung Clients
   * ''2a01:01e8:c003::/48'': Clients   * ''2a01:01e8:c003::/48'': Clients
 +  * ''85.236.200.128/29'': Transfernetz AS33843 v4
 +  * ''2a01:1e8:3:5::10/124'': Transfernetz AS33843 v6
  
 ==== IPs Gast-NAT 10.0.8.0/24 ==== ==== IPs Gast-NAT 10.0.8.0/24 ====
Zeile 65: Zeile 96:
 | 85.236.195.73 | NAT gw09n03 | | 85.236.195.73 | NAT gw09n03 |
 | 85.236.195.74 | glrunner-ffs08 | | 85.236.195.74 | glrunner-ffs08 |
 +| 85.236.195.76 | dhcp02 |
 | 85.236.195.77 | monitor01 + onboarder01 | | 85.236.195.77 | monitor01 + onboarder01 |
 | 85.236.195.78 | Gateway nepustil  | | 85.236.195.78 | Gateway nepustil  |
  
-==== IPs 2a01:01e8:c003::/112 ====+==== IPs 85.236.200.128/29 ====
  
 ^ IP            ^ Allokation  ^ ^ IP            ^ Allokation  ^
-2a01:01e8:c003::1/112 ffs06 +85.236.200.129 core01-z10a 
-2a01:01e8:c003::2/112 ffs08 | +85.236.200.134 as33843     |
-| 2a01:01e8:c003::3/112 | ffs07 | +
-| 2a01:01e8:c003::eeee/112 | Gateway nepustil |+
  
-==== IPs 2a01:01e8:c003:1::/64 ====+==== IPs 2a01:1e8:c003::/112 ====
  
 ^ IP            ^ Allokation  ^ ^ IP            ^ Allokation  ^
-| 2a01:01e8:c003:1::93/64 | gw09n03 | +| 2a01:1e8:c003::1/112 | ffs06 | 
-| 2a01:01e8:c003:1::244/64 | monitor01 + onboarder01 | +| 2a01:1e8:c003::2/112 | ffs08 | 
-| 2a01:01e8:c003:1::eeee/64 | Gateway nepustil |+| 2a01:1e8:c003::3/112 | ffs07 | 
 +| 2a01:1e8:c003::eeee/112 | Gateway nepustil | 
 + 
 +==== IPs 2a01:1e8:c003:1::/64 ==== 
 + 
 +^ IP            ^ Allokation 
 +| 2a01:1e8:c003:1::93/64 | gw09n03 | 
 +| 2a01:1e8:c003:1::244/64 | monitor01 + onboarder01 | 
 +| 2a01:1e8:c003:1::252/64 | dhcp02 | 
 +| 2a01:1e8:c003:1::eeee/64 | Gateway nepustil | 
 + 
 +====
  
  • technik/colo-zettachring.1652818382.txt.gz
  • Zuletzt geändert: vor 3 Jahren
  • von Roland Volkmann