Mikrotik
CRS112
12 Port Switch mit 8x PoE RJ46 1G (PoE) und 4x SFP 1G
TODO: VLAN Filtering auf bridge nicht aktiv
Funktionierende Config mit VLANs:
| VLAN/Port | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | sfp1 | sfp2 | sfp3 | sfp4 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 30 mesh | t | t | t | t | t | t | t | t | t | t | t | t |
| 40 client | t | t | t | t | t | t | t | t | t | t | t | t |
| 88 mgmt | t? | t? | t? | t? | t? | t? | t? | t? | t? | t? | t? |
# 1970-01-12 08:37:53 by RouterOS 7.15.2 # software id = P6UJ-R8F4 # # model = CRS112-8P-4S # serial number = HEM08SNTDT2 /interface bridge add admin-mac=48:A9:8A:E9:0B:D8 auto-mac=no comment=defconf name=bridge /interface ethernet set [ find default-name=ether4 ] poe-out=off /interface vlan add interface=bridge name=mgmt vlan-id=88 /interface list add name=WAN add name=LAN /port set 0 name=serial0 /interface bridge port add bridge=bridge comment=defconf interface=ether1 add bridge=bridge comment=defconf interface=ether2 add bridge=bridge comment=defconf interface=ether3 add bridge=bridge comment=defconf interface=ether4 add bridge=bridge comment=defconf interface=ether5 add bridge=bridge comment=defconf interface=ether6 add bridge=bridge comment=defconf interface=ether7 add bridge=bridge comment=defconf interface=ether8 add bridge=bridge comment=defconf interface=sfp9 add bridge=bridge comment=defconf interface=sfp10 add bridge=bridge comment=defconf interface=sfp11 add bridge=bridge comment=defconf interface=sfp12 /interface ethernet switch egress-vlan-tag add tagged-ports=switch1-cpu,ether1 vlan-id=88 add tagged-ports=ether1,ether2,ether3,ether4,ether5,ether6,ether7,ether8,sfp10,sfp9,sfp12,sfp11 vlan-id=30 add tagged-ports=ether1,ether2,ether3,ether4,ether5,ether6,ether7,ether8,sfp10,sfp9,sfp12,sfp11 vlan-id=40 add tagged-ports=ether1 vlan-id=41 /interface ethernet switch ingress-vlan-translation add customer-vid=0 new-customer-vid=88 ports=ether3,ether1,ether2,ether4,ether5,ether6,ether8,ether7,sfp9,sfp10,sfp11,sfp12 /interface ethernet switch vlan add comment=mgmt ports=switch1-cpu,ether1,ether2,ether3,ether4,ether5,ether6,ether7,ether8,sfp10,sfp9,sfp12,sfp11 vlan-id=88 add comment=clnt-freies-radio ports=ether1 vlan-id=41 add comment=ffs-mesh ports=ether1,ether2,ether3,ether4,ether5,ether6,ether7,ether8,sfp10,sfp9,sfp12,sfp11 vlan-id=30 add comment=ffs-client ports=ether1,ether2,ether3,ether4,ether5,ether6,ether7,ether8,sfp10,sfp9,sfp12,sfp11 vlan-id=40 add comment=mgmt109 ports=ether1,ether2,ether3,ether4,ether5,ether6,ether7,ether8,sfp10,sfp9,sfp12,sfp11 vlan-id=109 /interface list member add interface=ether1 list=WAN add interface=ether2 list=LAN add interface=ether3 list=LAN add interface=ether4 list=LAN add interface=ether5 list=LAN add interface=ether6 list=LAN add interface=ether7 list=LAN add interface=ether8 list=LAN add interface=sfp9 list=LAN add interface=sfp10 list=LAN add interface=sfp11 list=LAN add interface=sfp12 list=LAN /ip address add address=192.168.88.20/24 interface=mgmt network=192.168.88.0 /ip hotspot profile set [ find default=yes ] html-directory=hotspot /snmp set enabled=yes /system identity set name=sw-infozelt /system note set show-at-login=no